ENGINEERING CASE
Engineering Cases
Engineering Cases
Thermoplastic Profiled Road Marking Paint
Product Introduction
The thermoplastic profiled road marking paint is modified on the basis of the thermoplastic road marking paint, and the coating has excellent thixotropic properties in the molten state mainly by improving the fluid characteristics of the original coating. By shortening the dry-kneading time and increasing the compressive strength and softening point, special special construction tools are used to regularly draw various convex markings such as point shapes and strip shapes on the surface of the marking line.
Specification
◆ Excellent compression and impact resistance after molding and curing
◆ When the wheel is pressed, it generates vibration of appropriate frequency and makes a roar, which has a good safety warning effect.
◆ In the rainy night, it can reflect light with the part that protrudes from the water surface.
◆ Excellent weather resistance
Guide Using
◆ Consumption (Actual consumption depends on the roughness of pavement)
|
Reference Table of Material Consumption |
|
|
|
Thermoplastic profiled |
|
Paint |
6kg/㎡ |
|
Glass Beads |
350g/㎡ |
◆ Setting specifications:
The height of the bump is 5mm, and the bottom base is 1-2mm;
◆ Typical installation areas:
High grade highway boundary line,corner,diversion area,entrance marking,bridge,tunnel,steep slope and other sections
City road junction parking line,lane boundary,special lane demarcation marking
Other places that must have a hint function marking
Technical Data:
◆ Curing time:≤3minutes
◆ Technical Data:
◆ Retroreflection value: ≥150mcd.m-2.lx-1 (white), ≥100mcd.m-2.lx-1 (yellow)
◆ Anti slide swing valve:≥45BPN