ENGINEERING CASE
Engineering Cases
Engineering Cases
Waterbone Road Marking Paint
Product Introduction
The waterbone road marking paint is made of water as the dispersion medium, emulsified polyacrylic resin as the binder, and processed with the corresponding pigments, fillers and additives. During the construction process, the VOC emission is very small. A green product that can achieve “clean production”.
Specification
◆ Non-combustible, non-toxic, reduce air pollution
◆ Good film stability, good adhesion to glass beads, excellent reflective properties
◆ Flexible and water resistant
◆ High coverage rate
◆ Easy to clean with water
Guide Using
◆ Consumption（Actual consumption depends on the roughness of Pavement ）
|
|
waterbone road marking paint |
|
Thickness(Wet film) |
0.5mm |
|
Consumption of paint |
0.8kg/㎡ |
◆ Typical installation areas:
Mainly used in city road
Scenic highway Airport runway etc.
◆ Construction method
Construction method:High pressure airless spraying
Technical Data
◆ Curing time:≤10minutes
◆ Solid content: ≥75%
◆ Coverage rate (white): ≥90%;(yellow): ≥80%
◆ Wear resistance: ≤40mg
◆ Water resistance: no abnormality in water for 24 hours